CHA board

From NeoGeo Development Wiki
Revision as of 03:35, 13 October 2011 by SMKDAN (talk | contribs) (→‎V ROM)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

From MAME's source:

MVS

CHA boards

CHA-32

CHA-8M

CHA42G

CHA42G-1

CHA 42G-2

CHA 42G-3

CHA 42G-3B

CHA256

CHA256B

CHA512Y

  • Max 8 8MiB C ROMs
  • Max 128KiB M1 ROM
  • Max 128KiB S1 ROM
  • NEO-273
  • NEO-ZMC
  • LS139,LS174

CHAFIO

  • used with NEO-CMC 90G06C7042 or NEO-CMC 90G06C7050

MVS CHAFIO REV1.0 (KOF-2001)

CHAFIO (SNK 2002)

CHAFIO

  • Max 8 8MiB C ROMs
  • Max 256KiB (?) M1 ROM
  • used only with NEO-CMC 90G06C7050

PROG boards

PROG-NAM

PROG-HERO

PROG-EP

PROG-8MB

PROG8M42

PROG16

PROG 42G

PROG 42G-COM

PROG 42G-1

PROG-G2

PROG 4096

PROG 4096 B

PROGGSC

PROGSM

PROGSS3

PROGTOP

PROGSF1

PROGEOP

PROGLBA

PROGBK1

The only non-protected board that can bankswitch and use all V ROM space. Really common and very useful for homebrew stuff or converts.

P ROM

P1 can be 512K, 1M or 2M (27C400/27C800/27C160).

  • If P1 is 2M then some jumper must be set (JB3? didn't look into it. see kof95) and P2 should be empty. First half of P1 is mapped to 0x200000-0x2FFFFF and second half is mapped to 0x000000-0x0FFFFFF.
  • If P1 is 512K or 1M, then P2 can contain a bankswitched ROM (same type as P1 plus 27C322). P1 appears at 0x000000-0x0FFFFF. P2 banked rom appears in 0x200000-0x2FFFFF.

V ROM

V ROMs can be 1M, 2M or 4M (27C800/27C160/27C322). Size of largest ROM is selected with a pair of jumpers and the other 4 should be left unconnected. 512K can also be used but only if there is one ROM and only in the last used slot.

ROM size Jumper A Jumper B
1M JV1 JV2
2M JV3 JV4
4M JV5 JV6

Pinouts

Bankswitching is done with the LS74. It's not needed if the game isn't banked. Any write to an odd 0x200000-0x2FFFFF address will set the bank.

Cart edge LS74 P2
A5 pin 2 N/A
A6 pin 12 N/A
N/A pin 5 pin 42
N/A pin 9 pin 32

One of 4 V ROMs is enabled with a set of LS139 outputs. The pair of V ROM jumpers effectively choose a set of 2 NEO-PCM address outputs to input to the LS139.

Jumper LS139 V ROM
JV1 pin 2 N/A
JV2 pin 3 N/A
JV3 pin 2 N/A
JV4 pin 3 N/A
JV5 pin 2 N/A
JV6 pin 3 N/A
N/A pin 4 V1 pin 14
N/A pin 5 V2 pin 14
N/A pin 6 V3 pin 14
N/A pin 7 V4 pin 14

The LS08 is used to AND the two PORT /OE signals.

  • 4x 1/2/4MiB V ROMs
  • 1/2MiB P1 ROM
  • 1/2/4MiB P2 ROM
  • 2x 512KiB EP1/EP2 ROM
  • NEO-PCM
  • LS139,LS08,LS74

PROGBK2

PROGBK2 REV1.0 (KOF-2001)

PROGBK2

PROGBK2R

PROGBK3R

PROGBK3S

PROGBK2S

PROGV (Brezzasoft)

Same board manufacturer as SNK ?

  • 42pin V1 and P1 ROMs (DIP or TSOP)
  • 64KiB Battery-backed RAM (Mapped to $200000~?)
  • External I/O port (8 ?)
  • Room for 2x8DIP switchs