Difference between revisions of "CRE401"

From NeoGeo Development Wiki
Jump to: navigation, search
m
m
 
Line 1: Line 1:
SIL capacitor and resistor array used in NeoGeo systems, especially for protection of input ports and auxiliary circuits ([[MV-LED]]). Also found as "CR10-A-*" in late [[NEO-CDD boards]]. Drop-in replacements seem hard to find but using simple 1/4W 330 ohms resistors seem to be a good quick fix.
+
Serial-In-Line capacitor and resistor array used on NeoGeo boards, to protect input ports and auxiliary circuits ([[MV-LED]]). Also found as "CR10-A-*" on late [[NEO-CDD boards]]. Drop-in replacements seem hard to find but using common 1/4W resistors seems to be enough for a quick fix.
  
They are 4 identical RC circuits with a pull-up resistor.
+
They are composed of 4 identical circuits. The leftmost pin's net pulls all outputs through 1k resistors. The 330 ohm resistors provide current protection (sometimes as fuses), the capacitors smooth out eventual spikes.
  
 
[[File:Cre401.png]]
 
[[File:Cre401.png]]
Line 8: Line 8:
  
 
[[Category:Chips]]
 
[[Category:Chips]]
 +
[[Category:Repairs]]

Latest revision as of 03:50, 3 March 2016

Serial-In-Line capacitor and resistor array used on NeoGeo boards, to protect input ports and auxiliary circuits (MV-LED). Also found as "CR10-A-*" on late NEO-CDD boards. Drop-in replacements seem hard to find but using common 1/4W resistors seems to be enough for a quick fix.

They are composed of 4 identical circuits. The leftmost pin's net pulls all outputs through 1k resistors. The 330 ohm resistors provide current protection (sometimes as fuses), the capacitors smooth out eventual spikes.

Cre401.png

[Original manufacturer datasheet ("-A Circuit")]