Converts: Difference between revisions

From NeoGeo Development Wiki
Jump to navigation Jump to search
(Created page with "thumb|SMT flash adapters used on a sacrificial SNK PCB. "Converts" commonly refers to modified home system cartridges, with their ROMs replaced by t...")
 
mNo edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
[[File:boot_convert.jpg|thumb|SMT flash adapters used on a sacrificial SNK PCB.]]
[[File:boot_convert.jpg|thumb|SMT flash adapters used on a sacrificial SNK PCB.]]


"Converts" commonly refers to modified home system cartridges, with their ROMs replaced by those of MVS games (which are usually cheaper).
In the NeoGeo community, "converts" commonly refers to modified cartridges, having their ROMs replaced by those of another game or by programmable memory.


This can be done for own use, for selling clearly as "converts" (doubtful legality), or for plain [[bootleg|fraud]].
This can be done for one's own use, for selling clearly as "converts" (doubtful legality), or for plain [[bootleg|fraud]].
 
The usual method is to replace the label on the plastic shell, remove the memory chips from the PCB, eventually modify the [[jumper]] configuration, and
solder back either MVS cartridge ROMs, or freshly programmed chips containing the new game's data.


The usual method is to replace the label on the cartridge's shell, remove the ROMs from the PCB, eventually modify the [[jumper]] configuration, and
solder back either original ROMs, or freshly programmed EPROMs or flash containing the new game's data.


[[Category:Cartridge systems]]
[[Category:Cartridge systems]]

Latest revision as of 03:28, 9 July 2018

SMT flash adapters used on a sacrificial SNK PCB.

In the NeoGeo community, "converts" commonly refers to modified cartridges, having their ROMs replaced by those of another game or by programmable memory.

This can be done for one's own use, for selling clearly as "converts" (doubtful legality), or for plain fraud.

The usual method is to replace the label on the cartridge's shell, remove the ROMs from the PCB, eventually modify the jumper configuration, and solder back either original ROMs, or freshly programmed EPROMs or flash containing the new game's data.