Ghostlop (prototype): Difference between revisions

From NeoGeo Development Wiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{GameInfo|right
{{GameInfo|right
|en_title=Ghostlop (prototype)
|en_title=Ghostlop (prototype)
|jp_title=Ghostlop (prototype)
|jp_title=ゴーストロップ (プロトタイプ)
|developer=Data East Corporation
|developer=Data East Corporation
|ngh_id=228
|ngh_id=228
|megcount=78
|mvs_release=yes
|mvs_release=yes
|mvs_release_en=y
|mvs_release_en=n
|mvs_release_jp=y
|mvs_release_jp=y
|mvs_romset=ghostlop
|mvs_romset=ghostlop
|mvs_date=1996
|mvs_date=1996 and 2001 (location test only)
|mvs_pchip=
|mvs_pchip=None
|mvs_pboard=PROGGSC
|mvs_pboard=PROGGSC
|mvs_cboard=CHA256
|mvs_cboard=CHA256
Line 16: Line 17:
[[Category:Games]]
[[Category:Games]]


Uses socketed EPROMs on the PROG board, and flash chips on adapter boards on the CHA. Has a piece of cardboard between the 2 boards to avoid shorts due to the fact that the adapter boards for the flash chips would maybe cause shorts.
The location test version uses socketed EPROMs on the PROG board, flash chips on adapter boards for the C ROMs and EPROMs for M1 and S1 on the CHA. It has a piece of cardboard between the 2 boards to avoid shorts because the socketed flash adapter boards are a bit too high and could get shorted with traces on the PROG board.


[[File:Ghostlop.jpg|1000px]]
[[File:Ghostlop.jpg|800px]]

Latest revision as of 12:09, 4 April 2019

General Info
USA Title Ghostlop (prototype)
Japanese Title ゴーストロップ (プロトタイプ)
European Title Ghostlop (prototype)
NGH 228
Developer Data East Corporation
Editor SNK
Meg count 78
TCRF page None

MVS Release

Release date 1996 and 2001 (location test only)
PROG Board PROGGSC
CHA Board CHA256
Protection Chip None
MAME romset ghostlop

AES Release : No

CD Release : No

The location test version uses socketed EPROMs on the PROG board, flash chips on adapter boards for the C ROMs and EPROMs for M1 and S1 on the CHA. It has a piece of cardboard between the 2 boards to avoid shorts because the socketed flash adapter boards are a bit too high and could get shorted with traces on the PROG board.