JAMMA connector pinout

From NeoGeo Development Wiki
Revision as of 16:46, 13 September 2020 by Monk (talk | contribs) (added information of 1-slot boards using jamma standard)
Jump to navigation Jump to search

MVS edge connectors aren't fully JAMMA compliant depending on the model of the board.

1-Slot boards, tend to use the JAMMA standard with only 3 boards being able to use stereo output (MV1, MV1-F, MV1-FS).

Multi-slot boards, use a different pinout based on Jamma commonly refered as 'MVS pinout', this has a couple of changes mainly because of the different nature of the boards, like having Stereo and the need to change the currently playing game title by pressing the 'SELECT' button.

Please refer to the MVS user manual of the specific board model, for a better understanding of the type of pinout it uses.

Like true JAMMA edges, the pad pitch is .156in (3.96mm). There are 28 pins per side (key included), 56 total.

Many harnesses use regular 56 pin board connectors which don't have the key to avoid accidentally plugging them backwards. Doing so will certainly fry the inputs chip (NEO-C1...), be careful.

Note that the G, I, O, and Q letters aren't used to avoid confusion with other characters.

JAMMA pinout

The arrows represent the signal direction from the MVS board.

Bottom Top
GND A 1 GND
B 2
+5V C 3 +5V
D 4
Unused E 5 Unused
+12V F 6 +12V
Key H 7 Key
Coin counter #2 J 8 Coin counter #1
Coin lockout #2 K 9 Coin lockout #1
Speaker Neg L 10 Speaker Pos
Audio GND M 11 Unused
Video green N 12 Video red
Video sync P 13 Video blue
Service button R 14 Video GND
Unused S 15 Test button
Coin switch #2 P2 T 16 Coin switch #1 P1
P2 Start U 17 P1 Start
P2 Up V 18 P1 Up
P2 Down W 19 P1 Down
P2 Left X 20 P1 Left
P2 Right Y 21 P1 Right
P2 button A Z 22 P1 button A
P2 button B a 23 P1 button B
P2 button C b 24 P1 button C
P2 button D c 25 P1 button D
Unused d 26 Unused
GND e 27 GND
f 28

MVS pinout

Checked infos from [HardMVS.com]. The arrows represent the signal direction from the MVS board.

Bottom Top
GND A 1 GND
B 2
+5V C 3 +5V
D 4
Unused E 5 Unused
+12V F 6 +12V
Key H 7 Key
Coin counter #2 J 8 Coin counter #1
Coin lockout #2 K 9 Coin lockout #1
Left speaker L 10 Right speaker
Test button M 11 Mono audio
Video green N 12 Video red
Video sync P 13 Video blue
Service button R 14 Video GND
Coin switch #4 P2 S 15 Coin switch #3 P1
Coin switch #2 P2 T 16 Coin switch #1 P1
P2 Start U 17 P1 Start
P2 Up V 18 P1 Up
P2 Down W 19 P1 Down
P2 Left X 20 P1 Left
P2 Right Y 21 P1 Right
P2 button A Z 22 P1 button A
P2 button B a 23 P1 button B
P2 button C b 24 P1 button C
P2 button D c 25 P1 button D
Select down d 26 Select up
GND e 27 GND
f 28