KOF 96 custom loading screen (LOGO_E.PRG).

LOGO files are optional structured files to create custom CD loading animations.

The system ROM loads one of these files according to the console's nationality setting at address $120000 if present in the CD's root. The possible file names are LOGO_E.PRG, LOGO_U.PRG, and LOGO_J.PRG.

The files must not be larger than 2048 bytes.

File format

Address	Size	Description
0	Word	Data type (known values: $0000, $0001, $0003) The 8 low bits are stored to $11C817 by the system ROM. Bit 0 - If set do not draw the internal 'NOW LOADING please wait' graphic (see picture top right). Bit 1 - If set no progress indicator is drawn. Bit 2 - If set no animation is drawn. No other bits seem to be checked by the system ROM. The above is true on the first IPL load only. Some games have different in-game loading graphics that do not follow the above. More information is needed on how these work (SAMSHO4 for example).
0+2	Longword	Data type 1:Fix tiles 2:Palette 3:Map 4:Animation Map
2+4	Longword	Absolute data start address (Starting from $120000)
...
2+*	Longword	$FFFFFFFF terminator

Fix tiles data

Offset (longword) $4000 = tile $200
Size (longword) $4000 = $200 tiles
Tile data...

Like the regular fix graphics format, but byteswapped.

Palette data

Palette number (word), the loading bar seems to use palette 0, so don't use it. Remember that fix tiles can only use the 16 first palettes.
16 words of color data.

Map data

Fix address where to start mapping ($7102 is good)
Width in tiles (word) $18
Height in tiles (word) $0B
Tile numbers/palettes...

Mapped left to right, top to down.

Animation map data

All values are words

Fix map address where to start drawing ($7102 is good)
Width in tiles
Height in tiles
Number of frames in animation
Animation speed (in frames)
Raw tile numbers/palettes as in the fix map...

Using LOGO files for in-game loading

By default the system ROM will always use the initial LOGO file during in game loading sequences. It is possible to change this by loading a new data over the logo information at $120000. How this gets loaded is not yet confirmed but its suspected that games request the data to be loaded as it would any other data given there is not need for 'LOGO' to be in the file name in this situation. It may also be possible the system ROM looks out for data being loaded into this region before drawing.

The ability to change the default progress bar (handled by the system ROM) is also available. The system ROM places the start address of its code to handle progress bar drawing at $11C80C. This code is then always called via 'MOVEA.L 0x11C80C,A0', 'JSR(A0)'. To use a custom progress bar simply place the start address of your custom progress bar code at $11C80C. Current progress bar state is held at address $10F691. Your code should handle all elements of drawing the progress bar.

It appears games plant their custom progress bar code into the default LOGO file as well as any further files that get loaded to this range. Below is the routine used by Samurai Shodown IV as seen in file 'JL_ST1.PRG' once in RAM. The main game program code places 0x120086 to $11C80C

120086  4EF9 0012 4AD0             JMP      0x124AD0

124AD0  4DF9 003C 0000             LEA      0x3C0000,A6
124AD6  41F9 0012 4B00             LEA      0x124B00,A0
124ADC  1239 0010 F691             MOVE.B   0x10F691,D1
124AE2  0241 00F0                  ANDI.W   #0xF0,D1
124AE6  D0C1                       ADDA.W   D1,A0
124AE8  203C 719B A200             MOVE.L   #0x719BA200,D0
124AEE  7E0F                       MOVEQ    #0xF,D7
124AF0  1018                       MOVE.B   (A0)+,D0
124AF2  2C80                       MOVE.L   D0,(A6)
124AF4  0680 0020 0000             ADDI.L   #0x200000,D0
124AFA  51CF FFF4                  DBF      D7,*-0xA [0xC00422]
124AFE  4E75                       RTS

Logo file

Contents