MVS cartridge pinout

From NeoGeo Development Wiki
Revision as of 04:37, 25 June 2012 by Furrtek (talk | contribs) (Created page with "{| class="regdef" align="center" style="text-align:center;align:right;" |CHA bottom |CHA top |PROG bottom |PROG top |- |200px |[[File:mvscartchatop....")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
CHA bottom CHA top PROG bottom PROG top

Beware ! Pinouts found elsewhere have ROMOE/4MB swapped, it's an error on the original schematics. /ROMOE is on pin 33 bottom, 4MB is on pin 34 bottom.

See Signal names for the description of each pin.

(SMKDAN) "SYSTEMB" appears to actually be a slot selection pin.

  • On MV-2F, slot 1 A42 is connected to NEO-F0 SLOT0
  • slot 2 A42 is connected to NEO-F0 SLOT1

Makes sense for 1F schematics to connect it straight to SYSTEMB since there are no other possible slots. On multislot, it comes from NEO-F0 (or equivalent) SLOT* outputs. NEO-F0 has SYSTEMB as an input so it probably only has SLOT* pins active when the cart ROMs are selected.

Is this signal ever used ? It's a dead end on all my carts. --Furrtek 06:37, 25 June 2012 (CEST)

Retrieved from "https://wiki.neogeodev.org/index.php?title=MVS_cartridge_pinout&oldid=2619"