Difference between revisions of "NEO-257"

From NeoGeo Development Wiki
Jump to: navigation, search
m
m (enable info)
Line 15: Line 15:
 
*Select: Output A if LOW, B if HIGH.
 
*Select: Output A if LOW, B if HIGH.
 
*Some pins marked as ground could be "enable" pins
 
*Some pins marked as ground could be "enable" pins
 
+
**35 is active high enable atleast for Y8~Y15
 +
**33 is active low enable atleast for Y8~Y15 (confirmed from NEO-257 connection on a 2 slot). In the example from the pic it appears to be hardwired to always be enabled.
 
[[Category:Chips]]
 
[[Category:Chips]]

Revision as of 02:46, 6 May 2012

Quadruple 74HC257 2-to-1 multiplexer with common select line, making 16 switches in one chip. Used in dual slot MVS systems to select one of the two C ROM (and S ROM ?) buses.

Select signal comes from one of the "SLOT" outputs of NEO-F0 ?

Pinout

Information provided by Channelmaniac.

File:Neo-257 pinout.png

OpenOffice Draw file: File:Neo-257.odg

  • A*,B*: Inputs
  • Y*: Outputs
  • Select: Output A if LOW, B if HIGH.
  • Some pins marked as ground could be "enable" pins
    • 35 is active high enable atleast for Y8~Y15
    • 33 is active low enable atleast for Y8~Y15 (confirmed from NEO-257 connection on a 2 slot). In the example from the pic it appears to be hardwired to always be enabled.