Difference between revisions of "NEO-AES3-3 board"

From NeoGeo Development Wiki
Jump to: navigation, search
m (Picture credit)
(added the information about the cases of power not being 9v and advised to have a look at the power page)
 
Line 51: Line 51:
  
 
* Uses the second generation chipset ({{Chipname|NEO-B1}}, {{Chipname|NEO-C1}}, {{Chipname|LSPC2-A2}}).
 
* Uses the second generation chipset ({{Chipname|NEO-B1}}, {{Chipname|NEO-C1}}, {{Chipname|LSPC2-A2}}).
* Exclusively works with [[power requirements|9V power supplies]].
 
 
* Analog audio stuff is grouped in one spot.
 
* Analog audio stuff is grouped in one spot.
 +
* Supposedly power input problem was patched to exclusively work with [[power requirements|9V power supplies]] however there have been cases reported where this didn't happen so make sure to have a look at the [[power requirements]] page for a better understanding.
  
 
[[Category:Cartridge systems]]
 
[[Category:Cartridge systems]]

Latest revision as of 23:50, 25 May 2020

Second (?) version of the AES main board.

Board map

Original picture by BIG BEAR.

Neo-aes3-3.jpg

Differences with the NEO-AES board

  • Uses the second generation chipset (NEO-B1, NEO-C1, LSPC2-A2).
  • Analog audio stuff is grouped in one spot.
  • Supposedly power input problem was patched to exclusively work with 9V power supplies however there have been cases reported where this didn't happen so make sure to have a look at the power requirements page for a better understanding.