NEO-AES4-1 board

From NeoGeo Development Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Neo Geo AES 4-1 board

Seems to be the sixth and latest board revision.

Some (all ?) units appear to be heavily shielded with a metal cover and conductive coating on the plastic shell.

Differences with the NEO-AES3-6 board

  • The power supply circuit was (finally) moved next to the power connector.
  • Most through-hole chips were replaced by their surface mount versions.
  • The PLCC version of the 68k CPU was used. Also tiny Z80.
  • The SP1 ROM is an OTP part.
  • Resistor networks were added on bus lines, maybe as an attempt to reduce radiated noise.
  • TC9018P composite sync generator.
  • SYNC/NEW-SYNC jumper.
  • BNKB/RBNKB jumper.