The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


Package	QFP64R
Manufacturer
First use	1991 ?
Used on	NEO-AES3-3 ...

Just a 24-bit buffer and logic for 68k vector table swapping.

68k vector table swapping

The 68k vector table seen by the 68k is selected by writing to REG_SWPROM (table from the game) or REG_SWPBIOS (table from the system ROM).

A22Z and A23Z are used in place of A22 and A23 to make the address appear to address decoding chips as a system ROM access instead of a P ROM access.

The VEC signal comes from the 74H259 system latch.

Address	Maps to
Address	VEC = 0	VEC = 1
$000000~$00007F	$C00000~$C0007F	$000000~$00007F
$000080~$BFFFFF	No change
$C00000~$C0007F	$000000~$00007F	$C00000~$C0007F
$C00080~$FFFFFF	No change

Verilog from User:Kyuusaku:

{A23Z,A22Z} = A[23:22] ^ 2{~|{A[21:7],^A[23:22],VEC}}

Pinouts

Input to output map

64 -> 5
1 -> 6
2 -> 7
3 -> 8
4 -> 9
15 -> 11
16 -> 12
17 -> 13
18 -> 14
19 -> 22
20 -> 23
21 -> 24
31 -> 27
32 -> 28
33 -> 29
34 -> 30
36 -> 39
37 -> 40
38 -> 41
48 -> 43
49 -> 44
50 -> 45
51 -> 46
52 -> 47
53 -> 55 if VEC is high
54 -> 56 if VEC is high

Console

On the AES, the AND gate is used to make /SROMOE from (/SROMOEL AND /SROMOEU).

MV2B & MV2-01 @ H7 pinout

55 = sPCK1B
56 = sPCK2B

P_bus buffer

MV2B @ G2 pinout

OpenOffice Draw file: File:Neo-e0 mv2b G2.odg

A1~A23: 68k address bus
MCA0~MCA23: memory card address bus
BNK0~BNK2: memory card banking from NEO-D0
VEC: System ROM vector table swapping enable

MV2B @ F7 pinout

OpenOffice Draw file: File:Neo-e0 mv2b F7.odg

Acts just as a buffer.

s*: signals to both slots

MV2F @ E1 pinout (to be confirmed) and AES

OpenOffice Draw file: File:Neo-e0.odg

A1~A23: 68k address bus
Y0~Y23: memory card address bus
BNK0~BNK2: comes from NEO-D0, memory card bank
VEC: System ROM vector table swapping
ANI0, ANI1, AND0: AND gate used to generate ROMOE from (ROMOEU and ROMOEL)

NEO-E0

Contents