NEO-E0

From NeoGeo Development Wiki
Jump to: navigation, search
Aes e0.jpg
Package QFP64R
Manufacturer Logo fujitsu.jpg
First use 1991 ?
Used on NEO-AES3-3 ...

68k vector table swapping

The 68k vector table is swapped with the system ROM one by using REG_SWPBIOS or REG_SWPROM.

A22Z~A23Z are used to make the address appear to address decoding chips as a system ROM access instead of a P ROM access.

Address Maps to
VEC = 0 VEC = 1
$000000~$00007F $C00000~$C0007F $000000~$00007F
$000080~$BFFFFF $000080~$BFFFFF
$C00000~$C0007F $000000~$00007F $C00000~$C0007F
$C00080~$FFFFFF $C00080~$FFFFFF

User:Kyuusaku: {A23Z,A22Z} = A[23:22] ^ 2{~|{A[21:7],^A[23:22],VEC}}

Pinouts

On the AES, the AND gate is used to get /SROMOE from /SROMOEL AND /SROMOEU.

MV2B @ H7 pinout

55 = sPCK1B 56 = sPCK2B

MV2B @ G2 pinout

Neo-e0 G2 pinout.png

OpenOffice Draw file: File:Neo-e0 mv2b G2.odg

MV2B @ F7 pinout

Neo-e0 F7 pinout.png

OpenOffice Draw file: File:Neo-e0 mv2b F7.odg

Acts just as a buffer.

  • s*: signals to both slots

MV2F @ E1 pinout (to be confirmed)

Neo-e0 pinout.png

OpenOffice Draw file: File:Neo-e0.odg

  • A1~A23: 68k address bus
  • Y0~Y23: memory card address bus
  • BNK0~BNK2: comes from NEO-D0, memory card banking
  • VEC: System ROM vector table swapping enable
  • ANI0, ANI1, AND0: AND gate used to generate ROMOE from ROMOEU and ROMOEL