NEO-ZMC2

From NeoGeo Development Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Package QFP80R
Manufacturer
First use 1994 ?
Used on MV1FZS Cartridges...

NEO-ZMC and PRO-CT0 in one package.

Can address up to 4MiB of M1 ROM.

Found in second revision MVS boards (for the PRO-CT0 logic only), and AES cartridges.

Pinout


Edit this pinout

NEO-ZMC part:

  • SDA0,SDA1,SDA8~SDA15: Z80 address bus
  • MA11~MA21: M ROM address outputs

PRO-CT0 part, inputs:

  • 12M: 12MHz clock, outputs next pixel on falling edge.
  • C0~C31: C ROM data bus (2*16 bits). Gives all the pixel data needed for a 8 pixel line.
  • H: When high, reverse bit order of pixels shifted out (used for sprites horizontal flipping)
  • EVEN: Swap A/B pixels.
  • LOAD: Latch C ROM data on rising edge of 12M.

Outputs:

  • DOTA: High when pixel A is opaque (color > 0)
  • DOTB: High when pixel B is opaque (color > 0)
  • GAD0~GAD3: Pixel A color index
  • GBD0~GBD3: Pixel B color index