Power amp

From NeoGeo Development Wiki
Revision as of 21:52, 31 October 2016 by Furrtek (talk | contribs) (Created page with "Many arcade cabs don't have embedded audio amps, so many systems had to amplify their audio output theirselves to drive the cab's speaker(s). These components can die from ov...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Many arcade cabs don't have embedded audio amps, so many systems had to amplify their audio output theirselves to drive the cab's speaker(s).

These components can die from overheating or voltage surges on the 12V line.

Dead power amps tend to output no audio at all and short out, tripping the cab's or supergun's power supply protection. Crackling audio is most often a digital issue (contacts, cut traces...) and faint audio is often caused by aged/bad capacitors or broken volume pots.

  • MV1F, MV1FZS: Hitachi HA13001. Stereo. 2x 5W in 4 ohms. Replacement: ?
  • MV4, MV6: Probably HA13001.
  • MV1B: Toshiba TA8201AK. Mono. 1x ~7W in 4 ohms. Replacement: ?
  • MV1C: ?