Power amp

From NeoGeo Development Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Most arcade cabs don't have embedded audio amps. Systems have to amplify their audio output theirselves to drive the cab's speaker(s).

These components can die from overheating or voltage surges on the 12V line.

Dead power amps tend to output no audio at all and short out, tripping the cab's or supergun's power supply protection. Crackling audio is most often a digital issue (contacts, cut traces...) and faint audio is often caused by aged/bad capacitors or broken volume pots.

  • MV1A: Motorola MC13308T4.
  • MV1F, MV1FZS: Hitachi HA13001. Stereo. 2x 5W in 4 ohms. Replacement: ?
  • MV4, MV6: Probably HA13001.
  • MV1B: Toshiba TA8201AK. Mono. 1x ~7W in 4 ohms. Replacement: ?
  • MV1C: ST TDA7240. Mono 1x 20W in 4ohms.