RAM chip

From NeoGeo Development Wiki
Revision as of 01:18, 21 December 2015 by Furrtek (talk | contribs) (Created page with "thumb|Sony CXK58256 120ns RAM MVS RAM chips often fry due to overvoltage from a badly adjusted or failing cab power supply. It appe...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Sony CXK58256 120ns RAM

MVS RAM chips often fry due to overvoltage from a badly adjusted or failing cab power supply. It appears that the most common failure mode is the inability to write new data, resulting in errors during system self-test at the beginning of address ranges.

Basically, all NeoGeo RAM chips with "256" or "257" in their markings are 8-bit 32kB RAMs.

Pinout and cross-refence

To do.

Speed grade

The number after the - indicates the speed (max time between /RD going low and stable data):

  • 15: 150ns
  • 12: 120ns
  • 10: 100ns
  • 70: 70ns
  • 45: 45ns

Speed grade must absolutely be equal or less to replaced RAM chip.

Replacement

Look for 5 volt, 32kB (32K x 8bit) / 256kbit SRAM (Static RAM) with the right speed grade (most today are 45ns, so any will do) in 28 pin SOIC package. Cypress, ISSI and Lyontek still make them, they go for about $2.50.