Reset generator: Difference between revisions

From NeoGeo Development Wiki
Jump to navigation Jump to search
m (Signal)
m (Internal schematic)
Line 4: Line 4:


It has an open-collector output tied to {{Sig|RST|RST}} (not RESET !), which is shared with the reset button on the AES. The signal goes to {{Chipname|NEO-B1}}.
It has an open-collector output tied to {{Sig|RST|RST}} (not RESET !), which is shared with the reset button on the AES. The signal goes to {{Chipname|NEO-B1}}.
Not to be confused with the [[watchdog]] reset.
==Internal schematic==
[[File:Pst518b.png]]


Datasheet: [[File:PST518B.pdf]].
Datasheet: [[File:PST518B.pdf]].
Not to be confused with the [[watchdog]] reset.


[[Category:Chips]]
[[Category:Chips]]

Revision as of 18:27, 22 June 2016

File:Cd1 resetgen.jpg
PST518B in a CD1 system.

The Mitsumi PST518B is a reset generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.

It has an open-collector output tied to RST (not RESET !), which is shared with the reset button on the AES. The signal goes to NEO-B1.

Not to be confused with the watchdog reset.

Internal schematic

Datasheet: File:PST518B.pdf.