Difference between revisions of "Reset generator"

From NeoGeo Development Wiki
Jump to: navigation, search
m (Created page with "thumb|PST518B in a CD1 system. PST518B reset generator. Datasheet http://www.datasheetcatalog.org/datasheets/700/478877_DS.pdf here. Not to be con…")
 
(Replacement: Added a pin compatible replacement)
 
(7 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
[[File:Cd1_resetgen.jpg|thumb|PST518B in a CD1 system.]]
 
[[File:Cd1_resetgen.jpg|thumb|PST518B in a CD1 system.]]
  
PST518B reset generator. Datasheet [[http://www.datasheetcatalog.org/datasheets/700/478877_DS.pdf here]].
+
The Mitsumi PST518B is a [[reset]] generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.
 +
 
 +
It has an open-collector output tied to the {{Sig|RST|RST}} line (not {{Sig|RESET|RESET}} !), which is shared with the reset button on the home system. The line goes to {{Chipname|NEO-B1}}.
  
 
Not to be confused with the [[watchdog]] reset.
 
Not to be confused with the [[watchdog]] reset.
  
[[Category:Base system]]
+
==Internal schematic==
 +
 
 +
[[File:Pst518b.png]]
 +
 
 +
Datasheet: [[File:PST518B.pdf]].
 +
 
 +
==Replacement==
 +
 
 +
Not pin-compatible: TL7757CL
 +
 
 +
Pin-compatible: MCP120-450GI/TO
 +
 
 +
 
 +
[[Category:Chips]]

Latest revision as of 22:07, 13 June 2020

PST518B in a CD1 system.

The Mitsumi PST518B is a reset generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.

It has an open-collector output tied to the RST line (not RESET !), which is shared with the reset button on the home system. The line goes to NEO-B1.

Not to be confused with the watchdog reset.

Internal schematic

Pst518b.png

Datasheet: File:PST518B.pdf.

Replacement

Not pin-compatible: TL7757CL

Pin-compatible: MCP120-450GI/TO