Difference between revisions of "Reset generator"

From NeoGeo Development Wiki
Jump to: navigation, search
m
(Replacement: Added a pin compatible replacement)
 
(4 intermediate revisions by one other user not shown)
Line 2: Line 2:
  
 
The Mitsumi PST518B is a [[reset]] generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.
 
The Mitsumi PST518B is a [[reset]] generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.
 +
 +
It has an open-collector output tied to the {{Sig|RST|RST}} line (not {{Sig|RESET|RESET}} !), which is shared with the reset button on the home system. The line goes to {{Chipname|NEO-B1}}.
 +
 +
Not to be confused with the [[watchdog]] reset.
 +
 +
==Internal schematic==
 +
 +
[[File:Pst518b.png]]
  
 
Datasheet: [[File:PST518B.pdf]].
 
Datasheet: [[File:PST518B.pdf]].
  
Not to be confused with the [[watchdog]] reset.
+
==Replacement==
 +
 
 +
Not pin-compatible: TL7757CL
 +
 
 +
Pin-compatible: MCP120-450GI/TO
 +
 
  
[[Category:Base system]]
+
[[Category:Chips]]

Latest revision as of 22:07, 13 June 2020

PST518B in a CD1 system.

The Mitsumi PST518B is a reset generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.

It has an open-collector output tied to the RST line (not RESET !), which is shared with the reset button on the home system. The line goes to NEO-B1.

Not to be confused with the watchdog reset.

Internal schematic

Pst518b.png

Datasheet: File:PST518B.pdf.

Replacement

Not pin-compatible: TL7757CL

Pin-compatible: MCP120-450GI/TO