Signals

From NeoGeo Development Wiki
Revision as of 05:29, 6 April 2016 by Furrtek (talk | contribs)
Jump to navigation Jump to search

Most names come from the official schematics.

Clocks

Name Description Type Comes from Fault consequence
24M 24MHz master clock Clock NEO-D0 Nothing works, no video at all
12M 12MHz clock (24/2) non-inverted Clock NEO-D0 Bad graphics
8M 8MHz clock (24/3) non-inverted Clock LSPC No sound
6MB 6MHz clock (24/4) inverted Clock NEO-D0 Black screen ?
4M 4MHz clock (24/6) non-inverted Clock LSPC No sound
4MB 4MHz clock (24/6) inverted Clock ? ?
1MB 3MHz (!) clock (24/8) inverted Clock NEO-D0 ?
68KCLK 12MHz clock (24/2) non-inverted Clock NEO-D0 Click of death
68KCLKB 12MHz clock (24/2) inverted Clock NEO-D0 ?
2H1 S ROM A3 Address LSPC Bad fix graphics
A1~A23 68k address bus Address 68k Click of death
A22I,A23I Altered address lines for 68k vector table swap Address ? Probably click of death
AS 68k Address Strobe Control 68k Probably click of death
BNK0~2 Memory card bank selection Control ? Errors on access to big memory cards
CA4 C ROMs A4 Address LSPC Bad sprite graphics
C* or CR0~CR31 C ROMs data bus (2*16bits), data for one 8-pixels line Data C ROM Bad sprite graphics
D0~D15 68k data bus Data Multiple Click of death
/DTACK 68k Data Transmit ACKnowledge (see wait cycles) Control 68k Click of death ?
FIXD0~FIXD7 Fix layer data bus, data for 2 pixels Data S ROM Garbled graphics, solid color screen
P0~P23 Multiplexed P bus Muxed Multiple Garbled or absent graphics
PA0~PA11 Palette RAM address bus Address NEO-B1 Bad colors, snow, black screen
  • PAL: Palette RAM address decode for 68k access
  • PCK1B: Low 55ns, high 610 (1.5MHz) Clock to latch C ROM address from P0~P23 (mapping) on rising edge.
  • PCK2B: Low 55ns, high 610 (1.5MHz) Clock to latch S ROM address from P0~P15 (mapping) on rising edge.
  • /PORTADRS: $200000-$2FFFFF (P2+ ROM/Security chip) any access
  • /PORTOEL: $200000-$2FFFFF (P2+ ROM/Security chip) odd byte read
  • /PORTOEU: $200000-$2FFFFF (P2+ ROM/Security chip) even byte read
  • /PORTWEL: $200000-$2FFFFF (P2+ ROM/Security chip) odd byte write
  • /PORTWEU: $200000-$2FFFFF (P2+ ROM/Security chip) even byte write
  • /PWAIT0, /PWAIT1: adds 0 to 3 cycle delay for P2 ROM reads, see wait cycles
  • R/W: 68k Read/Write
  • /ROMOE: $000000-$0FFFFF (P1 ROM) read
  • /ROMOEL: $000000-$0FFFFF (P1 ROM) odd byte read
  • /ROMOEU: $000000-$0FFFFF (P1 ROM) even byte read
  • /ROMWAIT: add 1-cycle delay for P1 ROM reads
  • /SROMOE: $C00000-$CFFFFF (System ROM) read
  • /SROMOEL: $C00000-$CFFFFF (System ROM) odd byte read
  • /SROMOEU: $C00000-$CFFFFF (System ROM) even byte read
  • SDA0~SDA15 : Z80 address bus
  • SDD0~SDD7: Z80 data bus
  • SDRAD0~SDRAD7: ADPCM-A ROM multiplexed bus (data/address)
  • SDRA8,SDRA9,SDRA20~SDRA23: ADPCM-A ROM address bus
  • SDPAD0~SDPAD7: ADPCM-B ROM multiplexed bus (data/address)
  • SDPA8,SDPA9,SDPA10,SDPA11: ADPCM-B ROM address bus
  • SYSTEM: low when onboard ROMs selected
  • SYSTEMB: inverted SYSTEM