VRAM: Difference between revisions

From NeoGeo Development Wiki
Jump to navigation Jump to search
(Cleanup, memory map sizes fix (thanks HPMAN))
m (typo)
Line 11: Line 11:
* {{Reg|REG_VRAMMOD ($3C0004)}} is the signed value automatically added to the VRAM address after a write.
* {{Reg|REG_VRAMMOD ($3C0004)}} is the signed value automatically added to the VRAM address after a write.


Due to the different access slots used internally for each of the VRAM zones, the address register muts be set directly instead of relying on {{Reg|REG_VRAMMOD}} to cross zones ($0000~$7FFF to/from $8000~$FFFF).
Due to the different access slots used internally for each of the VRAM zones, the address register must be set directly instead of relying on {{Reg|REG_VRAMMOD}} to cross zones ($0000~$7FFF to/from $8000~$FFFF).


==Memory map==
==Memory map==

Revision as of 09:38, 22 May 2018

VRAM stands for Video RAM.

File:Aes cxk5814.jpg
One of two CXK5814 2KiB RAM chips used for the upper zone of the VRAM ($8000~$87FF) on a AES system

The NeoGeo has 68KiB of VRAM split in two: a 64KiB lower zone, and 4KiB higher zone. Contrary to other systems, the VRAM does not contain actual graphics. It is used to store sprite attributes, the fix layer tile map and sprite lists for video rendering.

Access to VRAM is always done through 3 memory mapped registers handled by the LSPC, it does not appear in the 68k address space. Every VRAM address points to a 16-bit word, not a byte.

Due to the different access slots used internally for each of the VRAM zones, the address register must be set directly instead of relying on REG_VRAMMOD to cross zones ($0000~$7FFF to/from $8000~$FFFF).

Memory map

Start End Words Zone Description
$0000 $6FFF 28K Lower SCB1
$7000 $74FF 4K Fix map
$7500 $7FFF Extension
$8000 $81FF 512 Upper SCB2
$8200 $83FF 512 SCB3
$8400 $85FF 512 SCB4
$8600 $867F 128 Sprite list for even scanlines
$8680 $86FF 128 Sprite list for odd scanlines
$8700 $87FF 256 Unused (free)

Acces timing

Even if VRAM can be modified even during active display, some timing restrictions have to be met in order to avoid skipping writes or reading incorrect data. This is because the LSPC can only provide a limited number of access slots for the CPU between the video rendering steps.

SNK imposed minimum waiting times to always be sure that no read or write operation to VRAM will fail:

  • After writing the VRAM address, a read will return valid data after 16 CPU cycles or more (>32mclk).
  • After writing the VRAM data, a new address can be set after 16 CPU cycles or more (>32mclk).
  • After writing the VRAM data, another write can be done after 12 CPU cycles or more (>24mclk).

Note that these restrictions only concern the VRAM access, and not the other LSPC registers.

Overclocked systems often produce video glitches because games are trying to access VRAM too quickly.

Speed

  • Lower (slow) VRAM must be 120ns or less (3mclk).
  • Upper (fast) VRAM must be 35ns or less (1mclk).