VRAM

From NeoGeo Development Wiki
Revision as of 02:04, 19 November 2012 by Furrtek (talk | contribs)
Jump to navigation Jump to search

VRAM stand for Video RAM.

File:Aes cxk5814.jpg
One of two CXK5814 2KiB RAM chips used for the upper zone of the VRAM ($8000~$87FF) on a AES system

The NeoGeo has 68KiB (physically 64KiB + 4KiB) of VRAM organised as 16 bits words, which is used to store sprite attributes and the map for the fix layer. Contrary to other systems, the VRAM here does not contain actual graphics.

It isn't mapped in the 68k's address space. The only way to read and write to it is by using 3 Memory mapped registers as i/o ports. Every address points to a word in VRAM, not a byte.

  • VRAM_ADDR ($3C0000) sets the VRAM address for the next read/write operation
  • VRAM_RW ($3C0002) is the data read or to write
  • VRAM_MOD ($3C0004) is the signed value added to the VRAM address after a write

SNK specifies that the address register should be set directly instead of using auto-incrementation when changing between VRAM zones ($0000~$7FFF and $8000~$FFFF).

Memory map

Start End Description
$0000 $6FFE SCB1
$7000 $7FFE Fix map
$8000 $81FE SCB2
$8200 $83FE SCB3
$8400 $85FE SCB4
$8600 $867E Sprite list for even scanlines
$8680 $86FE Sprite list for odd scanlines

VRAM can be modified at any time, even during active display.

Timing considerations

After a write:

  • Another write should be made after at least 12 cycles.
  • An address change should be made after at least 16 cycles.

After an address change, reads should be made after at least 16 cycles.

Note that these timings only affect the VRAM accesses, and not the LSPC registers.