Video DAC: Difference between revisions

From NeoGeo Development Wiki
Jump to navigation Jump to search
m (3 revisions: Import from wikkii)
mNo edit summary
Line 1: Line 1:
[[File:mvs_viddac.jpg|right|thumb|Resistor array forming the video DAC on a 1FZS.]]
[[File:mvs_viddac.jpg|right|thumb|Resistor array forming the video DAC on a 1FZS.]]


The NeoGeo uses a discrete video DAC made of precision resistors, and two 74LS273 latches controlled by [[NEO-B1]], [[NEO-GRC]] or [[NEO-GRZ]].
The NeoGeo uses a discrete video DAC made of precision resistors and two 74LS273 latches which store the color value from the [[palette RAM]] while the pixel has to be displayed. This is controlled by either [[NEO-B1]], [[NEO-GRC]] or [[NEO-GRZ]].


[[File:aes_viddac.png|right|thumb|Video DAC on a AES board.]]
[[File:aes_viddac.png|right|thumb|Video DAC on a AES board.]]
Line 7: Line 7:
[[File:aes_viddac_schematic.png]]
[[File:aes_viddac_schematic.png]]


Each color component has its own set of 7 resistors. 6 of them are used with the actual color value stored in the [[palette RAM]] (5 + 1 [[Palettes#Dark bit|common bit]]). The last (SHADOW signal) is related to the REG_DISPDISABLE and REG_DISPENABLE registers (74HC259 latch).
Each color component has its own set of 7 resistors. 6 of them are used with the actual color value (5 + 1 [[Palettes|common bit]]). The last (SHADOW signal) is related to the '''REG_SHADOW''' and '''REG_NOSHADOW''' registers (74HC259 latch).


The output voltage is then divided by 5 to obtain a 1Vp-p max signal, which can be fed to the [[CXA1145]] encoder.
The output voltage is then divided by 5 to obtain a 1Vp-p max signal, which can be fed to the [[CXA1145]] encoder.

Revision as of 14:03, 11 October 2011

File:Mvs viddac.jpg
Resistor array forming the video DAC on a 1FZS.

The NeoGeo uses a discrete video DAC made of precision resistors and two 74LS273 latches which store the color value from the palette RAM while the pixel has to be displayed. This is controlled by either NEO-B1, NEO-GRC or NEO-GRZ.

File:Aes viddac.png
Video DAC on a AES board.

File:Aes viddac schematic.png

Each color component has its own set of 7 resistors. 6 of them are used with the actual color value (5 + 1 common bit). The last (SHADOW signal) is related to the REG_SHADOW and REG_NOSHADOW registers (74HC259 latch).

The output voltage is then divided by 5 to obtain a 1Vp-p max signal, which can be fed to the CXA1145 encoder.