Z80 port map: Difference between revisions

From NeoGeo Development Wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
Some infos from [[User:kyuusaku]]
The decode mask for '''reading''' ports is always $0C. The one for writes is indicated for each case.
{| class="regdef"
{| class="regdef"
|'''Number'''
|'''Address'''
|'''Read'''
|'''Read'''
|'''Write'''
|'''Write'''
|'''[[Memory_mapped_registers#Address_decode_masks|Decode mask]]'''
|-
|-
|$00
|$00
|Read sound code from 68k
|Clear sound code buffer
|-
|$08
|
|
|NMI enable
*Read sound code from {{Chipname|68k}}
*Acknowledge [[Z80 interrupts|NMI]]
|Clear sound code from 68k to $00
|rowspan="2"|$0C
|-
|-
|$04~$07
|$04-$07
|colspan="2"|[[YM2610]] I/O
|colspan="2"|[[YM2610]] I/O
|-
|-
|$08
|$08
|Set [[Z80 memory map|$F000~$F7FF]] bank
|Set [[Z80|window 0]] bank
|
|rowspan="4"|Enable NMIs
|rowspan="4"|$1C
|-
|-
|$09
|$09
|Set $E000~$EFFF bank
|Set window 1 bank
|
|-
|-
|$0A
|$0A
|Set $C000~$DFFF bank
|Set window 2 bank
|
|-
|-
|$0B
|$0B
|Set $8000~$BFFF bank
|Set window 3 bank
|
|-
|-
|$0C
|$0C
|
|See {{Sig|SDRD1|SDRD1}}
|[[68k/Z80_communication|Reply]] to 68k
|[[68k/Z80_communication|Reply]] to 68k
|$0C
|-
|-
|$18
|$18
|
|See address $08
|NMI disable
|Disable NMIs
|$1C
|}
|}
Note that the [[M1 ROM]] [[Z80|bankswitching]] is done by '''reading''' ports.
SNK used an obscure feature of the Z80: when accessing ports, the top address bus byte is set to register C.
The banks can be chosen by putting the bank number in C, and doing IN A,(port).
This is handled by {{Chipname|NEO-ZMC}} in cartridges.
Some [[sound driver]]s use port $C0 (and others ?) in their code. Since only SDA2 and SDA3 are used for port decoding, port $C0 maps to a mirror of port $00. It's believed to be a remnant of some development tool.


[[Category:Base system]]
[[Category:Base system]]
[[Category:Audio system]]

Latest revision as of 09:19, 28 January 2024

Some infos from User:kyuusaku

The decode mask for reading ports is always $0C. The one for writes is indicated for each case.

Address Read Write Decode mask
$00
  • Read sound code from 68k
  • Acknowledge NMI
Clear sound code from 68k to $00 $0C
$04-$07 YM2610 I/O
$08 Set window 0 bank Enable NMIs $1C
$09 Set window 1 bank
$0A Set window 2 bank
$0B Set window 3 bank
$0C See SDRD1 Reply to 68k $0C
$18 See address $08 Disable NMIs $1C

Note that the M1 ROM bankswitching is done by reading ports.

SNK used an obscure feature of the Z80: when accessing ports, the top address bus byte is set to register C.

The banks can be chosen by putting the bank number in C, and doing IN A,(port). This is handled by NEO-ZMC in cartridges.

Some sound drivers use port $C0 (and others ?) in their code. Since only SDA2 and SDA3 are used for port decoding, port $C0 maps to a mirror of port $00. It's believed to be a remnant of some development tool.