Z80 port map

From NeoGeo Development Wiki
Revision as of 16:55, 18 December 2013 by Furrtek (talk | contribs)
Jump to navigation Jump to search
Number Read Write
$00 Read sound code from 68k Clear sound code buffer
$04~$07 YM2610 I/O
$08 Set $F000~$F7FF bank Enable NMI
$09 Set $E000~$EFFF bank
$0A Set $C000~$DFFF bank
$0B Set $8000~$BFFF bank
$0C Reply to 68k
$18 Disable NMI

Bank selection is made by reading ports. SNK used an obscure feature of the Z80: when accessing ports, the entire address bus is set, not only the lower 8 bits.

The banks can then be chosen by putting the bank number in B, the port number in C and doing IN A,(C). Or by putting the bank number in A and doing IN A,(Port). (to verify)