NEO-ZMC2: Difference between revisions
Jump to navigation
Jump to search
m (→Pinout) |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 3: | Line 3: | ||
|pkg=QFP80R | |pkg=QFP80R | ||
|manu=fujitsu | |manu=fujitsu | ||
|date= | |date=1990 | ||
|gates= | |gates= | ||
|used_on={{PCB|MV1FZS}} [[Cartridges]]... | |used_on={{PCB|MV1FZS}} [[Cartridges]]... | ||
| Line 9: | Line 9: | ||
{{Chipname|NEO-ZMC}} and {{Chipname|PRO-CT0}} in one package. | {{Chipname|NEO-ZMC}} and {{Chipname|PRO-CT0}} in one package. | ||
Can address up to 4MiB of [[M1 ROM]]. | |||
Found in second revision [[MVS hardware|MVS]] boards (for the PRO-CT0 logic only), and AES cartridges. | Found in second revision [[MVS hardware|MVS]] boards (for the PRO-CT0 logic only), and AES cartridges. | ||
Latest revision as of 18:38, 19 September 2025
| |
| Package | QFP80R |
| Manufacturer | 
|
| First use | 1990 |
| Used on | MV1FZS Cartridges... |
NEO-ZMC and PRO-CT0 in one package.
Can address up to 4MiB of M1 ROM.
Found in second revision MVS boards (for the PRO-CT0 logic only), and AES cartridges.
Pinout
NEO-ZMC part:
- SDA0,SDA1,SDA8~SDA15: Z80 address bus
- MA11~MA21: M ROM address outputs
PRO-CT0 part, inputs:
- 12M: 12MHz clock, outputs next pixel on falling edge.
- C0~C31: C ROM data bus (2*16 bits). Gives all the pixel data needed for a 8 pixel line.
- H: When high, reverse bit order of pixels shifted out (used for sprites horizontal flipping)
- EVEN: Swap A/B pixels.
- LOAD: Latch C ROM data on rising edge of 12M.
Outputs:
- DOTA: High when pixel A is opaque (color > 0)
- DOTB: High when pixel B is opaque (color > 0)
- GAD0~GAD3: Pixel A color index
- GBD0~GBD3: Pixel B color index