From NeoGeo Development Wiki
(Redirected from MVS schematics)
Jump to navigation Jump to search

AES (home)

Big thanks to Wolfsoft and ArcadeTV for the scans.

On page 6: There are two resistors in the bottom left corner that can't be seen due the page fold.

The R48 4.7k is connected to VCC and R49 4.7k is connected to GND.

Both resistors are connected to pin3 of U31A.


Beware ! There's an error on page 9 (cartridge edge connections): ROMOE/4MB are swapped. ROMOE should be on pin 33 bottom, and 4MB is on pin 34 bottom.

Peripheral (home/arcade)