NEO-E0

Package	QFP64R
Manufacturer
First use	1991 ?
Used on	NEO-AES3-3 ...

Just a 24-bit buffer and logic for 68k vector table swapping.

68k vector table swapping

The 68k vector table seen by the 68k is selected by writing to REG_SWPROM (table from the game) or REG_SWPBIOS (table from the system ROM).

A22Z and A23Z are used in place of A22 and A23 to make the address appear to address decoding chips as a system ROM access instead of a P ROM access.

The VEC signal comes from the 74H259 system latch.

Address	Maps to
	VEC = 0	VEC = 1
$000000~$00007F	$C00000~$C0007F	$000000~$00007F
$000080~$BFFFFF	No change
$C00000~$C0007F	$000000~$00007F	$C00000~$C0007F
$C00080~$FFFFFF	No change

Verilog from User:Kyuusaku:

{A23Z,A22Z} = A[23:22] ^ 2{~|{A[21:7],^A[23:22],VEC}}

Pinouts

Input to output map

• 64 -> 5
• 1 -> 6
• 2 -> 7
• 3 -> 8
• 4 -> 9
• 15 -> 11
• 16 -> 12
• 17 -> 13
• 18 -> 14
• 19 -> 22
• 20 -> 23
• 21 -> 24
• 31 -> 27
• 32 -> 28
• 33 -> 29
• 34 -> 30
• 36 -> 39
• 37 -> 40
• 38 -> 41
• 48 -> 43
• 49 -> 44
• 50 -> 45
• 51 -> 46
• 52 -> 47
• 53 -> 55 if VEC is high
• 54 -> 56 if VEC is high

Console

On the AES, the AND gate is used to make /SROMOE from (/SROMOEL AND /SROMOEU).

MV2B & MV2-01 @ H7 pinout

• 55 = sPCK1B
• 56 = sPCK2B

P_bus buffer

MV2B @ G2 pinout

OpenOffice Draw file: File:Neo-e0 mv2b G2.odg

A1~A23: 68k address bus MCA0~MCA23: memory card address bus BNK0~BNK2: memory card banking from NEO-D0 VEC: System ROM vector table swapping enable

MV2B @ F7 pinout

OpenOffice Draw file: File:Neo-e0 mv2b F7.odg

Acts just as a buffer. s*: signals to both slots

MV2F @ E1 pinout (to be confirmed)

OpenOffice Draw file: File:Neo-e0.odg

A1~A23: 68k address bus Y0~Y23: memory card address bus BNK0~BNK2: comes from NEO-D0, memory card bank VEC: System ROM vector table swapping ANI0, ANI1, AND0: AND gate used to generate ROMOE from (ROMOEU and ROMOEL)