UPD4990: Difference between revisions
m (Added information about 2 different versions present in the boards with two different pinouts) |
(Added UPD4990AC_pinout image) |
||
| Line 1: | Line 1: | ||
[[File:mvs_upd4990.jpg|right|thumb| | [[File:mvs_upd4990.jpg|right|thumb|µPD4990AG RTC on a (dirty) {{PCB|MV1FZS}} board.]] | ||
The µPD4990 is a RTC (Real Time Clock) chip made by NEC, used on [[MVS hardware]] to keep track of the time and date for [[bookkeeping]]. | The µPD4990 is a RTC (Real Time Clock) chip made by NEC, used on [[MVS hardware]] to keep track of the time and date for [[bookkeeping]]. | ||
| Line 24: | Line 24: | ||
==DIP14== | ==DIP14== | ||
[[File:UPD4990AC_pinout.png|256px]] | |||
=Failure= | =Failure= | ||
Revision as of 19:12, 15 June 2020
The µPD4990 is a RTC (Real Time Clock) chip made by NEC, used on MVS hardware to keep track of the time and date for bookkeeping.
There are two versions used, the DIP 14 pin uPD4990AC and the SOP 16 pin uPD4990AG.
It shares the battery-backed RAM's battery and has its own 32.768kHz crystal to run even when power is off.
The parallel command inputs aren't used, they are all set high to enable serial commands (see MVS schematics page 1, and datasheet).
Interface
The READ_CALENDAR system ROM call can be used to conveniently load the time and date to BIOS RAM locations.
Raw access is done through REG_STATUS_A for input and REG_RTCCTRL for output.
Pinouts
SOP16
DIP14
Failure
A damaged chip, oscillator or their connections can bring a CALENDAR ERROR, but most of the time the system ROM just freezes due to a self-test bug.
Datasheet
Official µPD4990A datasheet: [[1]]