CHA board

From MAME's source:

MVS

CHA boards

CHA512Y

• Max 8 8MiB C ROMs
• Max 128KiB M1 ROM
• Max 128KiB S1 ROM
• NEO-273
• NEO-ZMC
• LS139,LS174

CHAFIO

• used with NEO-CMC 90G06C7042 or NEO-CMC 90G06C7050

CHAFIO

• Max 8 8MiB C ROMs
• Max 256KiB (?) M1 ROM
• used only with NEO-CMC 90G06C7050

PROG boards

PROGBK1

The only non-protected board that can bankswitch and use all V ROM space. Really common and very useful for homebrew stuff or converts.

P ROM

P1 can be 512K, 1M or 2M (27C400/27C800/27C160).

• If P1 is 2M then some jumper must be set (JB3? didn't look into it. see kof95) and P2 should be empty. First half of P1 is mapped to 0x200000-0x2FFFFF and second half is mapped to 0x000000-0x0FFFFFF.
• If P1 is 512K or 8M, then P2 can contain a bankswitched ROM (same type as P1 plus 27C322). P1 appears at 0x000000-0x0FFFFF. P2 banked rom appears in 0x200000-0x2FFFFF.

V ROM

V ROMs can be 1M, 2M or 4M (27C800/27C160/27C322). Size of largest ROM is selected with a pair of jumpers and the other 4 should be left unconnected. 512K can also be used but only if there is one ROM and only the last used slot.

ROM size	Jumper A	Jumper B
8M	JV1	JV2
16M	JV3	JV4
32M	JV5	JV6

Pinouts

Bankswitching is done with the LS74. It's not needed if the game isn't banked. Any write to an odd 0x200000-0x2FFFFF address will set the bank.

Cart edge	LS74	P2
A5	pin 2	N/A
A6	pin 12	N/A
N/A	pin 5	pin 42
N/A	pin 9	pin 32

One of 4 V ROMs is enabled with a set of LS139 outputs. The pair of V ROM jumpers effectively choose a set of 2 NEO-PCM address outputs to input to the LS139.

Jumper	LS139	V ROM
JV1	pin 2	N/A
JV2	pin 3	N/A
JV3	pin 2	N/A
JV4	pin 3	N/A
JV5	pin 2	N/A
JV6	pin 3	N/A
N/A	pin 4	V1 pin 14
N/A	pin 5	V2 pin 14
N/A	pin 6	V3 pin 14
N/A	pin 7	V4 pin 14

The LS08 is used to AND to the two PORT /OE signals.

• 4x 1/2/4MiB V ROMs
• 1/2MiB P1 ROM
• 1/2/4MiB P2 ROM
• 2x 512KiB EP1/EP2 ROM
• NEO-PCM
• LS139,LS08,LS74

PROGV (Brezzasoft)

Same board manufacturer as SNK ?

• 42pin V1 and P1 ROMs (DIP or TSOP)
• 64KiB Battery-backed RAM (Mapped to $200000~?)
• External I/O port (8 ?)
• Room for 2x8DIP switchs