MVS cartridge

From NeoGeo Development Wiki
Revision as of 16:55, 19 August 2012 by Furrtek (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Unlike AES cartridges, the sprite graphics aren't pre-serialized by a NEO-ZMC2 or PRO-CT0 chip. The complete C ROM data bus is exposed to the cartridge edge, it's then serialized by the chip included on the board.

Since NEO-ZMC2 isn't present, NEO-ZMC is used to bankswitch the M1 ROM.

The cartridge connector has 2*2*60 (240) pins. See MVS cartridge pinout.

Trivia