SYSTEM ROM ERROR

From NeoGeo Development Wiki
Revision as of 19:21, 11 April 2020 by Furrtek (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The system ROM's checksum was found to be incorrect. This error is rather rare because a bad readback of the system ROM would often cause the system to crash or get stuck in a boot-loop before being able to show the error.

  • PCB damage ? Address lines from the 68k may be cut. If so, it's probably the higher ones.
  • Did you buy that UniBios on eBay ? Check that the EPROM is fast enough.
  • If an EPROM is used and its window isn't covered, it might be partially erased. Erase it completely and reprogram it.
Retrieved from "https://wiki.neogeodev.org/index.php?title=SYSTEM_ROM_ERROR&oldid=6587"