Difference between revisions of "Graphic glitches"

From NeoGeo Development Wiki
Jump to: navigation, search
m (C ROM)
m (S ROM data)
Line 156: Line 156:
 
==S ROM data==
 
==S ROM data==
  
jailbars..
+
[[File:S_D_0.png|thumb|right|S ROM D0 (FIXD0) stuck high which creates jailbars covering the whole screen]]
 +
 
 +
Data outputs from the S ROM go through [[pinouts|FIXD0~FIXD7]] on the cart slot. If any one of these traces is bad then it can cause glitches that cover the entire screen. A single bad output can cause every odd (or even) column of pixels on screen to be obscured. Sprites below can appear fine with half the screen covered up.

Revision as of 05:33, 1 June 2012

This is supposed to be a repair guide that doesn't need much technical knowledge on the GFX hardware to understand. Only cart systems are covered here. Pics are provided for all glitches described and can be used to compare glitches that show up on faulty hardware for help in repairs.


todo: maybe add more detail, get rest of pics/descriptions up ..don't have any LSPC-A0 info to work with so only LSPC2 is included for now

C ROM

All sprites come from the C ROMs. Most graphics on screen are sprites as the Neo has no dedicated scrolling background layers like other systems. If it moves, scales or appears to be part of a background then assume it's a sprite.

C ROM address

Reference pic used in samples

C ROM address lines follow this path:

  • LSPC2/LSPC-A0 to CHA slot (on multislots it will go through some buffers in between)
  • CHA slot to 74273 or similar(on oldest games)/NEO-273(on most games)/NEO-CMC(on newest games)
  • 273/CMC to C ROM address lines

See pinouts for the slot pin numbers of the P0~23/CA4 signals listed in the table.

Lower address lines

A stuck lower address line for C ROMs causes certain patterns with display glitches. The graphics appear to be selected correctly but are glitched in various ways. A bad trace in the path of pins listed in the table can cause the glitch shown in the sample pic.

Sample Address LSPC2 out NEO‑273 in NEO‑273 out C ROMs in Notes
C A0.png
A0 P16(134) P16(57) C_A0(64) A0(10) 1 row of pixels mirrored. Sprites appear "pixelated" as if it's lower res.
C A1.png
A1 P17(135) P17(59) C_A1(1) A1(9) Sets of 2 rows are mirrored.
C A2.png
A2 P18(136) P18(25) C_A2(32) A2(8) Sets of 4 rows are mirrored.
C A3.png
A3 P19(137) P19(27) C_A3(33) A3(7) Sets of 8 rows are mirrored.
C A4.png
A4 CA4(102) N/A N/A A4(6) Sets of 8 columns are mirrored. Note NEO-273 isn't used and CA4 on CHA connector goes straight to C ROM A3.

Higher address lines

A12 stuck high. Ryo in the bottom right is fine but everything else has the wrong sprites displayed.

Higher address lines can cause the 16x16 blocks of sprite graphics to appear without glitches but in completely wrong places. C ROM address A5 upwards can cause this. The patterns aren't obvious like they are for lower address lines so it's not as easy to diagnose. The sample pic to the right shows an example. Graphics from different stages, characters etc. can show up correctly but are misplaced.

C ROM data

jailbars..

S ROM

Graphics from the S ROM are used for stationary life bars, credit counters, on screen text and other graphics that don't need to move around. In the reference image, S ROM graphics are used for:

  • "SELECT ENEMY"
  • "TIME" and "5"
  • "COM"
  • "LEVEL-4" and "CREDIT 00"

They can't scroll or scale and they always appear "on top" of all sprites. This can cause S ROM issues to completely cover the screen while the opposite isn't true.

S ROM address

S ROM address lines follow the same path as C ROM address lines. 16 lines are shared with sprites and a single bad trace can affect both depending on what part of the path is affected. The NEO-273 (or whatever else is used) outputs separate S ROM/C ROM addresses from the shared address bus.

Lower address lines

Certain patterns appear for bad lower address lines like they do for C ROMs.

Sample Address LSPC2 out NEO‑273 in NEO‑273 out S ROM in Notes
S A0.png
A0 P12(126) P12(52) S_A0(48) A0(12) 1 row of pixels mirrored. Appears "pixelated".
S A1.png
A1 P13(128) P13(53) S_A1(49) A1(11) Sets of 2 rows mirrored.
S A2.png
A2 P14(129) P14(54) S_A2(50) A2(10) Sets of 4 rows mirrored.
S A3.png
A3 2H1(107) N/A N/A A3(9) Sets of 2 columns mirrored. CHA 2H1 goes straight to A3 on S ROM.
S A4.png
A4 P15(130) P15(55) S_A4(51) A4(8) Sets of 4 columns mirrored.

S ROM data

S ROM D0 (FIXD0) stuck high which creates jailbars covering the whole screen

Data outputs from the S ROM go through FIXD0~FIXD7 on the cart slot. If any one of these traces is bad then it can cause glitches that cover the entire screen. A single bad output can cause every odd (or even) column of pixels on screen to be obscured. Sprites below can appear fine with half the screen covered up.