Hardware DIPs: Difference between revisions

From NeoGeo Development Wiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
 
(4 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[File:mvs_dip.jpg|right|thumb|Hard DIPs on MV1F MVS board.]]
[[File:mvs_dip.jpg|right|thumb|Hard DIPs on MV1F MVS board.]]
[[File:harddips.png|right|thumb|DIP switches on MVS boards.]]
[[File:harddips.png|right|thumb|DIP switches state '''viewer''' in the [[system ROM]].]]


Physical switches on MVS boards used to configure various options like freeplay and multiplayer link. The switches states are readable through register {{Reg|REG_DIPSW}}.
Physical DIP switches on MVS boards used to configure various options like the number of coin chutes and the multiplayer link. The switches states are read through register {{Reg|REG_DIPSW}} as a byte (0 is on).


*Switch 8: Freeze (done by software, in a BIOS call)
* Switch 8: Freeze - pauses the game (done by software in a [[system ROM]] call)
*Switch 7: Enable freeplay
* Switch 7: Enable freeplay (player start doesn't require credits)
*Switch 6: Enable communication
* Switch 6: Enable communication
*Switches 4~5: [[Multiplayer]] link cab number setting
* Switches 4~5: [[Multiplayer]] link cab number (in binary: 1, 2, 3, 4)
*Switch 3: Mahjong Controller
* Switch 3: Enable [[mahjong controller]]
*Switch 2: Coin slots configuration
* Switch 2: Number of [[coin switch|coin chutes]] (1 or 2 Euro & Japan, 2 or 4 on USA)
*Switch 1: [[Test mode]]
* Switch 1: Bring up the system ROM menu at boot


There's no such switches on AES and CD systems ($300001 reads what ?).
There are no such switches on home and CD systems.
 
The {{PCB|MV4}} has an unused footprint for a second set of DIP switches "DSW2" which could have been read through register {{Reg|REG_SYSTYPE}}.


[[Category:Cartridge systems]]
[[Category:Cartridge systems]]

Latest revision as of 15:08, 2 September 2019

File:Mvs dip.jpg
Hard DIPs on MV1F MVS board.
File:Harddips.png
DIP switches state viewer in the system ROM.

Physical DIP switches on MVS boards used to configure various options like the number of coin chutes and the multiplayer link. The switches states are read through register REG_DIPSW as a byte (0 is on).

  • Switch 8: Freeze - pauses the game (done by software in a system ROM call)
  • Switch 7: Enable freeplay (player start doesn't require credits)
  • Switch 6: Enable communication
  • Switches 4~5: Multiplayer link cab number (in binary: 1, 2, 3, 4)
  • Switch 3: Enable mahjong controller
  • Switch 2: Number of coin chutes (1 or 2 Euro & Japan, 2 or 4 on USA)
  • Switch 1: Bring up the system ROM menu at boot

There are no such switches on home and CD systems.

The MV4 has an unused footprint for a second set of DIP switches "DSW2" which could have been read through register REG_SYSTYPE.