NEO-BUF

From NeoGeo Development Wiki
Revision as of 07:57, 7 February 2011 by Furrtek (talk | contribs) (1 revision)
Jump to navigation Jump to search
NEO-BUF chip used to split DRAM access on a CDM3-2 board.

Dual 8 bit bus switch.

File:Neo-bufpinout1.png

Putting the CTRL lines high make the corresponding bus pass through the chip. Setting it low makes the output hi-Z. This chip is extensively used in the NeoGeo CD to switch in between DRAMs (both output buses are tied together to a common one, and go to the NEO-GRC or NEO-GRZ chips).

Catégorie:Chips