Super MVS convertor II

From NeoGeo Development Wiki
Revision as of 20:34, 25 September 2012 by Furrtek (talk | contribs) (Created page with "<div align="center"> <gallery widths=400px perrow=2> File:SMC2_progtop.jpg|Prog board top File:SMC2_progbot.jpg|Prog board bottom File:SMC2_chatop.jpg|CHA board top File:SMC2_...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Uses a PAL18CV8 and two LS245 transceivers on the prog board. Two corresponding footprints for SIL pull-up resistors on the MVS side are left unpopulated.

Unrouted signals:

  • 4MB (MVS B34)
  • SLOTCS (MVS A42)

Uses a custom chip marked Neo Cell KS300 8436020333002 06-03 to simulate PRO-CT0 logic. An RC circuit (potentiometer) is used to delay the EVEN signal ?

According to [these pictures], the chip would be a custom marked Altera MAX EPM240 PLD. (Boundary scan device ID replies: BB085040 (EPM240 signature reversed) and the header on the back is for JTAG:

TMS TDO GND
TDI TCK 3.3V