SYSTEM INT1: Difference between revisions

Latest revision as of 05:28, 28 February 2017

The SYSTEM_INT1 call is the system ROM's v-blank interrupt routine.

It has its own frame counter (BIOS_INT1_FRAME_COUNTER, $10FDD4) and a flag to skip MESS_OUT and SYSTEM_IO (BIOS_INT1_SKIP, $10FEE3).

@@ Line 1: / Line 1: @@
-== [[SYSTEM_INT1]] ($C0044A): Multi-purpose VBL call ==
+== [[SYSTEM_INT1]] ($C00438): Multi-purpose VBL call ==
-Needs to be called at the beginning of the [[68k interrupts|vblank]] period. Sets values in RAM according to buttons states, checks [[CDDA]] commands, calls [[MESS_OUT]], and probably other things...
+The SYSTEM_INT1 call is the [[system ROM]]'s v-blank [[68k interrupts|interrupt]] routine.
-If called outside of vblank, interrupts need to be disabled before.
+It will call [[MESS_OUT]] and [[SYSTEM_IO]].
-Memory locations set (all 8bit):
+It has its own frame counter (BIOS_INT1_FRAME_COUNTER, $10FDD4) and a flag to skip [[MESS_OUT]] and [[SYSTEM_IO]] (BIOS_INT1_SKIP, $10FEE3).
-<pre>
-BIOS_P1CURRENT     ;$10FD95 Joystick 1 state
-BIOS_P1PREVIOUS    ;$10FD96 Previous joystick 1 state
-BIOS_P1CHANGE      ;$10FD97 Joystick 1 state change (edges)
-BIOS_P1REPEAT      ;$10FD98 Joystick 1 repeat (edge, and strobe if held more than ? calls)
-BIOS_P2CURRENT     ;$10FD9B Joystick 2 state
+[[Category:BIOS calls]]
-BIOS_P2PREVIOUS    ;$10FD9C Previous joystick 2 state
-BIOS_P2CHANGE      ;$10FD9D Joystick 2 state change (edges)
-BIOS_P2REPEAT      ;$10FD9E Joystick 2 repeat (edge, and strobe if held more than ? calls)
-BIOS_STATCURNT     ;Joystick 1/2 start/select state
-BIOS_STATCHANGE    ;Previous Joystick 1/2 start/select state
-</pre>
-Bit definitions: see [[Joypad]]
-[[Category:Code]]