P ROM: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (megabyte -> mebibyte) |
||
(7 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
[[File:p_rom.jpg|thumb|right|1MiB P1 ROM]] | [[File:p_rom.jpg|thumb|right|1MiB P1 ROM]] | ||
16bit ROM(s) containing the byteswapped [[68k]] program in [[cartridges]]. | |||
Sometimes, two 8 bit ROMs are used as a second P ROM (called "SP1/2" or "EP1/2"). | |||
When not banked, the maximum size is [[68k memory map|1MiB]]. Some games use [[bankswitching]] for larger than 2MiB P ROMs. | |||
Some cartridges use an [[NGPC flash board]] soldered in place of the mask ROMs. | |||
==Speed== | |||
Minimum speed: 150ns. Can use slower ROMs by using the cartridge's [[wait cycle]] configuration. | |||
==2 MiB P ROMs== | |||
When the P ROM is 2MiB, the second MiB of the P ROM is mapped to $000000->$0FFFFF in the [[68k memory map]], and the first MiB is mapped to $200000->$2FFFFF. In other words, the mebibytes inside the P ROM are swapped when mapped. This is a special case between standard 1MiB P ROMs and larger ROMs that require bankswitching. | |||
[[Category:Chips]] | [[Category:Chips]] | ||
[[Category: | [[Category:Cartridge systems]] |
Latest revision as of 18:27, 11 March 2024
16bit ROM(s) containing the byteswapped 68k program in cartridges.
Sometimes, two 8 bit ROMs are used as a second P ROM (called "SP1/2" or "EP1/2").
When not banked, the maximum size is 1MiB. Some games use bankswitching for larger than 2MiB P ROMs.
Some cartridges use an NGPC flash board soldered in place of the mask ROMs.
Speed
Minimum speed: 150ns. Can use slower ROMs by using the cartridge's wait cycle configuration.
2 MiB P ROMs
When the P ROM is 2MiB, the second MiB of the P ROM is mapped to $000000->$0FFFFF in the 68k memory map, and the first MiB is mapped to $200000->$2FFFFF. In other words, the mebibytes inside the P ROM are swapped when mapped. This is a special case between standard 1MiB P ROMs and larger ROMs that require bankswitching.