NEO-C1: Difference between revisions

From NeoGeo Development Wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 1: Line 1:
[[File:aes_c1.jpg|right|thumb|NEO-C1 chip from an AES board.]]
[[File:aes_c1.jpg|right|thumb|NEO-C1 chip from an AES board.]]


Also found on [[MVS hardware|MVS]] boards.
Multi-purpose keystone chip used for address decoding, inter-CPU communications, [[wait state]] generation, and [[player input]]s.


Handles both joypad ports inputs and drives the /OE lines for various chips ([[Battery-backed RAM]], LSPC...)
Maps itself to even byte access only (only D15~8 connected).


==Pinout==
==Pinout==

Revision as of 01:54, 3 March 2016

NEO-C1 chip from an AES board.

Multi-purpose keystone chip used for address decoding, inter-CPU communications, wait state generation, and player inputs.

Maps itself to even byte access only (only D15~8 connected).

Pinout

File:Neo-c1 pinout.png

OpenOffice Draw file: File:Neo-c1.odg

68k

  • A17~A21: 68k address bus
  • A22I~A23I: NEO-E0 address input
  • D8~D15: 68k data bus
  • R/W,UDS,LDS,AS,DTACK: 68k bus control signals
  • 68KCLK: 12MHz 68k clock
  • ROMWAIT,PWAIT0,PWAIT1,PDTACK: signals from cart PROG board to configure how /DTACK is generated for ROMOE region (how is it configured?)

Decoded signals

The following output and write enables have an upper(U)/lower(L) byte enable signal based on /UDS and /LDS from the 68k.

  • ROMOEU,ROMOEL: $000000-$0FFFFF read, 68k program ROM on cart PROG board
  • WRU,WRL,WWU,WWL: $100000-$1FFFFF read/write, 68k user RAM
  • PORTOEU,PORTOEL,PORTWEU,PORTWEL: $200000-$2FFFFF read/write, multipurpose signal on cart PROG board
  • SROMOEU,SROMOEL: $C00000-$CFFFFF read, BIOS
  • SRAMOEU,SRAMOEL,SRAMWEU,SRAMWEL: $D00000-$DFFFFF read/write, battery-backed RAM

The following are expected to be word accessed, byte writes and reads are ignored or do not work as expected.

  • CRDO,CRDW: $800000-$BFFFFF read/write, memory card
  • CRDC: Memory card select (CRDO AND CRDW ?)
  • LSPOE,LSPWE: $3C0000-$3DFFFF read/write, LSPC2-A2
  • PAL: $400000-$7FFFFF access, enables transcievers attached to palette RAM for 68k access

Z80 I/O

  • SDD0~SDD7: Z80 data bus used for 68k/Z80_communication
  • SDZ80R,SDZ80W: read / write signals for Z80 communication
  • SDW: signals that 68k has written a byte to Z80 port, will make NEO-D0 generate interrupt if enabled
  • SDZ80CLR: initialise stored byte to zero?