NEO-C1

NEO-C1 chip from an AES board.

Also found on MVS boards.

Handles both joypad ports inputs and drives the /OE lines for various chips (Battery-backed RAM, LSPC...)

Pinout

File:Neo-c1 pinout.png

68k

• A17~A21: 68k address bus
• A22I~A23I: NEO-E0 address input
• D8~D15: 68k data bus
• R/W,UDS,LDS,AS,DTACK: 68k bus control signals
• 68KCLK: 12MHz 68k clock
• ROMWAIT,PWAIT0,PWAIT1,PDTACK: signals from cart PROG board to configure how /DTACK is generated for ROMOE region (how is it configured?)

Decoded signals

The following output and write enables have an upper(U)/lower(L) byte enable signal based on /UDS and /LDS from the 68k.

• ROMEOU,ROMEOEL: $000000-$0FFFFF read, 68k program ROM on cart PROG board
• WRU,WRL,WWU,WWL: $100000-$1FFFFF read/write, 68k user RAM
• PORTOEU,PORTOEL,PORTWEU,PORTWEL: $200000-$2FFFFF read/write, multipurpose signal on cart PROG board
• SROMOEU,SROMOEL: $C00000-$CFFFFF read, BIOS
• SRAMOEU,SRAMOEL,SRAMWEU,SRAMWEL: $D00000-$DFFFFF read/write, battery-backed RAM

The following are expected to be word accessed, byte writes and reads are ignored or do not work as expected.

• CRDO,CRDW: $800000-$BFFFFF read/write, memory card
• LSPOE,LSPWE: $3C0000-$3DFFFF read/write, LSPC2-A2
• PAL: $400000-$7FFFFF access, enables transcievers attached to palette RAM for 68k access

Z80 I/O

• SDD0~SDD7: Z80 data bus used for 68k/Z80_communication
• SDZ80R,SDZ80W: read / write signals for Z80 communication
• SDW: signals that 68k has written a byte to Z80 port, will make NEO-D0 generate interrupt if enabled
• SDZ80CLR: initialise stored byte to zero?