CHA256

From NeoGeo Development Wiki
Jump to navigation Jump to search

C ROMs

Up to 8 * 32Mbit ROMs (27C322) can be used for a maximum of 256Mbit. 27C800/27C160 can also be used depending on jumper configuration.

The size of largest ROM is selected using a pair of jumpers. The rest should be left unconnected.

Largest C ROM Jumper set
1MiB J5+J6
2MiB J7+J8
4MiB J9+J10

These jumpers seem to apply only to those two ROMs, if the ROMs are not present, simply leave both jumpers unconnected.

C1/2 ROM type Jumper set
<4MiB R1
4MiB J11
C3/4 ROM type Jumper set
<4MiB R2
4MiB J12
C5/6 ROM type Jumper set
<4MiB R3
4MiB J13
C7/8 ROM type Jumper set
<4MiB R4
4MiB J14

A NEO-273 and a LS74 are used to address C ROM. The LS74 provides the 2 most significant bits. The LS139 enables one of four pairs of C ROMs using 2 address inputs depending on which 2 jumpers are connected.

  • Max 256Mbit C ROM (8x 32Mbit)
M1 ROM size Jumper set
64KiB J1+J4
128KiB J2+J3

AES version

C ROM type Jumper set
<4MiB J15+J16+J17+J18
4MiB J11+J12+J13+J14
EVEN delay Jumper set
1 gate J19
2 gates J20