CRE401: Difference between revisions

From NeoGeo Development Wiki
Jump to navigation Jump to search
m (2 revisions: Import from wikkii)
m (Added CR10-A photo)
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
SIL capacitor/resistor array used for input ports. Also called "CR10-A-*" on late [[NEO-CDD boards]]. Drop-in replacements seem hard to find  
[[File:CR10-A.jpg|right|thumb|CR10-A found in a MV4FS.]]
 
Serial-In-Line capacitor and resistor array used on NeoGeo boards, to protect input ports and auxiliary circuits ([[MV-LED]]). Also found as "CR10-A-*" on late [[NEO-CDD boards]]. Drop-in replacements seem hard to find but using common 1/4W resistors seems to be enough for a quick fix.
 
They are composed of 4 identical circuits. The leftmost pin's net pulls all outputs through 1k resistors. The 330 ohm resistors provide current protection (sometimes as fuses), the capacitors smooth out eventual spikes.


[[File:Cre401.png]]
[[File:Cre401.png]]


[[http://www.bitechnologies.com/pdfs/cr.pdf Original manufacturer datasheet ("-A Circuit")]]
Datasheet: [[File:Cr.pdf|Cr.pdf]] ("-A Circuit")


[[Category:Chips]]
[[Category:Chips]]
[[Category:Repairs]]

Latest revision as of 20:48, 17 May 2020

CR10-A found in a MV4FS.

Serial-In-Line capacitor and resistor array used on NeoGeo boards, to protect input ports and auxiliary circuits (MV-LED). Also found as "CR10-A-*" on late NEO-CDD boards. Drop-in replacements seem hard to find but using common 1/4W resistors seems to be enough for a quick fix.

They are composed of 4 identical circuits. The leftmost pin's net pulls all outputs through 1k resistors. The 330 ohm resistors provide current protection (sometimes as fuses), the capacitors smooth out eventual spikes.

File:Cre401.png

Datasheet: File:Cr.pdf ("-A Circuit")