P ROM

From NeoGeo Development Wiki
Revision as of 18:27, 11 March 2024 by City41 (talk | contribs) (megabyte -> mebibyte)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
File:P rom.jpg
1MiB P1 ROM

16bit ROM(s) containing the byteswapped 68k program in cartridges.

Sometimes, two 8 bit ROMs are used as a second P ROM (called "SP1/2" or "EP1/2").

When not banked, the maximum size is 1MiB. Some games use bankswitching for larger than 2MiB P ROMs.

Some cartridges use an NGPC flash board soldered in place of the mask ROMs.

Speed

Minimum speed: 150ns. Can use slower ROMs by using the cartridge's wait cycle configuration.

2 MiB P ROMs

When the P ROM is 2MiB, the second MiB of the P ROM is mapped to $000000->$0FFFFF in the 68k memory map, and the first MiB is mapped to $200000->$2FFFFF. In other words, the mebibytes inside the P ROM are swapped when mapped. This is a special case between standard 1MiB P ROMs and larger ROMs that require bankswitching.