Reset generator: Difference between revisions

From NeoGeo Development Wiki
Jump to navigation Jump to search
mNo edit summary
m (Signal)
Line 2: Line 2:


The Mitsumi PST518B is a [[reset]] generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.
The Mitsumi PST518B is a [[reset]] generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.
It has an open-collector output tied to {{Sig|RST|RST}} (not RESET !), which is shared with the reset button on the AES. The signal goes to {{Chipname|NEO-B1}}.


Datasheet: [[File:PST518B.pdf]].
Datasheet: [[File:PST518B.pdf]].
Line 7: Line 9:
Not to be confused with the [[watchdog]] reset.
Not to be confused with the [[watchdog]] reset.


[[Category:Base system]]
[[Category:Chips]]

Revision as of 15:37, 14 June 2016

File:Cd1 resetgen.jpg
PST518B in a CD1 system.

The Mitsumi PST518B is a reset generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.

It has an open-collector output tied to RST (not RESET !), which is shared with the reset button on the AES. The signal goes to NEO-B1.

Datasheet: File:PST518B.pdf.

Not to be confused with the watchdog reset.