Reset generator: Difference between revisions
Jump to navigation
Jump to search
m (Signal) |
m (Internal schematic) |
||
Line 4: | Line 4: | ||
It has an open-collector output tied to {{Sig|RST|RST}} (not RESET !), which is shared with the reset button on the AES. The signal goes to {{Chipname|NEO-B1}}. | It has an open-collector output tied to {{Sig|RST|RST}} (not RESET !), which is shared with the reset button on the AES. The signal goes to {{Chipname|NEO-B1}}. | ||
Not to be confused with the [[watchdog]] reset. | |||
==Internal schematic== | |||
[[File:Pst518b.png]] | |||
Datasheet: [[File:PST518B.pdf]]. | Datasheet: [[File:PST518B.pdf]]. | ||
[[Category:Chips]] | [[Category:Chips]] |
Revision as of 18:27, 22 June 2016
The Mitsumi PST518B is a reset generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.
It has an open-collector output tied to RST (not RESET !), which is shared with the reset button on the AES. The signal goes to NEO-B1.
Not to be confused with the watchdog reset.
Internal schematic
Datasheet: File:PST518B.pdf.