Reset generator: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (Replacement device) |
||
| Line 3: | Line 3: | ||
The Mitsumi PST518B is a [[reset]] generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V. | The Mitsumi PST518B is a [[reset]] generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V. | ||
It has an open-collector output tied to {{Sig|RST|RST | It has an open-collector output tied to the {{Sig|RST|RST}} line (not {{Sig|RESET|RESET}} !), which is shared with the reset button on the home system. The line goes to {{Chipname|NEO-B1}}. | ||
Not to be confused with the [[watchdog]] reset. | Not to be confused with the [[watchdog]] reset. | ||
| Line 12: | Line 12: | ||
Datasheet: [[File:PST518B.pdf]]. | Datasheet: [[File:PST518B.pdf]]. | ||
==Replacement== | |||
Not pin-compatible: TL7757CL | |||
[[Category:Chips]] | [[Category:Chips]] | ||
Revision as of 00:39, 22 June 2018
The Mitsumi PST518B is a reset generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.
It has an open-collector output tied to the RST line (not RESET !), which is shared with the reset button on the home system. The line goes to NEO-B1.
Not to be confused with the watchdog reset.
Internal schematic
Datasheet: File:PST518B.pdf.
Replacement
Not pin-compatible: TL7757CL