SYSTEM INT1: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
== [[SYSTEM_INT1]] ($C00438): Multi-purpose VBL call == | == [[SYSTEM_INT1]] ($C00438): Multi-purpose VBL call == | ||
'''TO CHANGE: THIS IS NOT SYSTEM_IO''' | |||
Needs to be called at the beginning of the [[68k interrupts|vblank]] period. Sets values in RAM according to buttons states, checks [[CDDA]] commands, calls [[MESS_OUT]], and probably other things... | Needs to be called at the beginning of the [[68k interrupts|vblank]] period. Sets values in RAM according to buttons states, checks [[CDDA]] commands, calls [[MESS_OUT]], and probably other things... | ||
Revision as of 22:19, 8 April 2012
SYSTEM_INT1 ($C00438): Multi-purpose VBL call
TO CHANGE: THIS IS NOT SYSTEM_IO
Needs to be called at the beginning of the vblank period. Sets values in RAM according to buttons states, checks CDDA commands, calls MESS_OUT, and probably other things...
If called outside of vblank, interrupts need to be disabled before.
Memory locations set (all 8bit):
BIOS_P1CURRENT ;$10FD95 Joystick 1 state
BIOS_P1PREVIOUS ;$10FD96 Previous joystick 1 state
BIOS_P1CHANGE ;$10FD97 Joystick 1 state change (edges)
BIOS_P1REPEAT ;$10FD98 Joystick 1 repeat (edge, and strobe if held more than ? calls)
BIOS_P2CURRENT ;$10FD9B Joystick 2 state
BIOS_P2PREVIOUS ;$10FD9C Previous joystick 2 state
BIOS_P2CHANGE ;$10FD9D Joystick 2 state change (edges)
BIOS_P2REPEAT ;$10FD9E Joystick 2 repeat (edge, and strobe if held more than ? calls)
BIOS_STATCURNT ;Joystick 1/2 start/select state
BIOS_STATCHANGE ;Previous Joystick 1/2 start/select stateBit definitions: see Joypad