Reset generator

From NeoGeo Development Wiki
Revision as of 18:27, 22 June 2016 by Furrtek (talk | contribs) (Internal schematic)
Jump to navigation Jump to search
File:Cd1 resetgen.jpg
PST518B in a CD1 system.

The Mitsumi PST518B is a reset generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.

It has an open-collector output tied to RST (not RESET !), which is shared with the reset button on the AES. The signal goes to NEO-B1.

Not to be confused with the watchdog reset.

Internal schematic

Datasheet: File:PST518B.pdf.

Retrieved from "https://wiki.neogeodev.org/index.php?title=Reset_generator&oldid=4885"