Reset generator

From NeoGeo Development Wiki
Revision as of 00:39, 22 June 2018 by Furrtek (talk | contribs) (Replacement device)
Jump to: navigation, search
PST518B in a CD1 system.

The Mitsumi PST518B is a reset generator, it holds the NeoGeo in reset as long as the power supply is below 4.4V.

It has an open-collector output tied to the RST line (not RESET !), which is shared with the reset button on the home system. The line goes to NEO-B1.

Not to be confused with the watchdog reset.

Internal schematic


Datasheet: File:PST518B.pdf.


Not pin-compatible: TL7757CL