Rendering logic
On the NeoGeo hardware, the GPU (Graphics Processing Unit) a.k.a. VDP, may refer to a chip or a group of different chips used to generate the video signal.
- LSPC-A0, PRO-B0 (early)
- LSPC2-A2, NEO-B1 (most common)
- NEO-GRC, NEO-OFC (CD systems)
- NEO-GRZ (CDZ, MV-1C ?)
See graphics pipeline for an overview of the interconnections between chips and cartridges.
Temporary notes
- PCK2 rises with BNKB and CHBL
- The first valid rendering cycle is 32mclk after CHBL low ?
- Fix and sprite pixels are rendered at the same speed because sprite pixels are written by pairs
- Tile pixel lines are rendered in halves:
- For the fix (32mclk = 8 pixels corresponds to 6MHz pixel clock):
- Full address is ...1**** (PCK2 pulse)
- 2H1 is 0 for 2 pixels (columns 0 & 1), then 1 for 2 pixels (columns 2 & 3)
- Full address is ...0**** (PCK2 pulse)
- 2H1 is 0 for 2 pixels (columns 4 & 5), then 1 for 2 pixels (columns 6 & 7)
- For sprites (32mclk = 16 pixels):
- Full address is ...1***** (PCK1 pulse)
- CA4 is 0 for 4 pixels (columns 0~3), then 1 for 4 pixels (columns 4~7)
- Full address is ...0***** (PCK1 pulse)
- CA4 is 0 for 4 pixels (columns 8~11), then 1 for 4 pixels (columns 12~15)
- As fix is rendered in realtime, the fix tile address is set before sprites (on a new line PCK2 pulses before PCK1)
- X position to B1, just before each PCK2 pulse (SP during 1mclk), for 20 sprites next to each other (X+16px each time):
- Start of line: 0000,0808,1010,1838,2000,2808,3010,3838,40C0,48E8,50F0,58F8,60C0,68E8,70F0,78F8,8000,8808,9010,9838,0,0,0...
Video generation
See Display timing for the sync signal's timing.
NEO-B1 is used for double-buffering scanlines. While a buffer is output to the screen, the other one is filled up. They're swapped each new scanline. Each of the two line buffers are actually 2 buffers of even/odd pixels. They will be named (1 & 2), and (3 & 4).
- The TMS0 signal from LSPC tells B1 how the pair of buffers are used:
- 0: Buffers 1&2 are output to the TV. Buffers 3&4 are written to.
- 1: Buffers 1&2 are written to. Buffers 3&4 are output to the TV.
- CSK1~4 signals are used to step to the next pixel (falling edge ?), periodic for video output, VRAM-dependent when filling up. Inactive during H-blank.
- WSE1~4 signals are used to indicate if the pixel color from GAD/GBD needs to be written to the buffer, matches CSK for video output (OE signal ?), depends on DOTA/DOTB (opaque pixel signal) when filling up.
- SS1~2 signals ?
- The rising edge of PCK1 and PCK2 stores fix or sprite pixels.
- The X position of the sprite (and something else in a byte ?) is latched by CSK falling edges when LD* is low.
- 1H1 is probably used to switch pixels of FIXD between left and right.
It seems that fix data is read 8 pixels in advance (confirms what Charles wrote in mvstech.txt). How is this handled in B1 ?
Sprite parsing
This is a draft. The following information shouldn't be considered as exact.
To do: Edit waveforms, FP and SP windows of the P BUS start 0.5mclk earlier (1.5,5,1.5,1.5,5,1.5 = 16).
- LSPC runs at 24MHz, but generates signals on rising and falling edges ("48MHz")
- Fast VRAM is 35ns (<1mclk), slow VRAM is 100ns (<2.5mclk, 3 ?)
- The fast VRAM reads always occur 1mclk (41.6ns) after address is set. Smallest access window is 1.5mclk.
- FIXT: P23~16 is 0, P15~0 is S ROM address (+ external 2H1)
- SPRT: P23~0 is C ROM address (+ external CA4)
- LO: P23~16 is LO ROM data, P15~0 is LO address
- FP: P19~16 is the fix tile palette, rest is 0
- SP: P23~16 is the sprite tile palette, P15~8 is X position, P7~0 is ?
- LSPC always starts filling up active sprite list A ($8600) each new frame
Read sequence:
Timing diagram when no sprites fall in the next scanline (no writes to sprite list):
Parse ################################ ################################ Render ########################## ########################## 24M |'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_ Addr | 600 | 200 | 201 | 202 | 203 | 204 | 681 | 00E | 20E | 40E | 600 | 205 | 206 | 207 | 208 | 209 | 682 | 00F | 20F | 40F PCK1 ______|'''|___________________________________________________________|'''|_____________________________________________________ PCK1B '''''''|____|''''''''''''''''''''''''''''''''''''''''''''''''''''''''''|___|'''''''''''''''''''''''''''''''''''''''''''''''''''' LOAD |'''''''|_______________________|'''''''|_______________________|'''''''|_______________________|'''''''|_______________________ 12M __|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|_ 2Pixel | | | | | | | | | | | | | | | | Read ? ! ! ! ! ! ! ! ! ! ? ! ! ! ! ! ! ! ! ! What 1 2 2 2 2 2 3 4 5 6 1 2 2 2 2 2 3 4 5 6...
- 1: Probably CPU acces slot with last address latched ($600)
- 2: Read sprite Y position from SCB3 ($200+) to see if it's in next scanline
- 3: Read sprite list ($600+) to get sprite #
- 4: Read SCB2 zoom values ($000+)
- 5: Read SCB3 Y/size/chain ($200+)
- 6: Read SCB4 X ($400+)
10 states in 16 cycles (or 5 in 8 cycles: 4-3-3-3-3).
Matched sprite = 6 or 7 (3 or 3.5mclk) = 2 slots Unmatched sprite = 3 or 4 (1.5 or 2mclk) = 1 slot 8mclk = 5 slots available for parsing out of 16mclk: 768mclk per scanline: 480 slots (unmatched). (240 matched)
SNK says max. 380 sprites can be parsed, and max 96 per line:
If we have 380-96 = 284 empty/unmatched sprites, then 96 matched sprites, we have 480-284 = 196 slots free, which allow 196/2 = 98 active sprites. Maybe 2 less because of scanline start delay or something ?
So the 380 sprites max. limit can be explained.
Can sprite parsing go over 380 ? For example:
- Is an active sprite displayed after 400 unmatched sprites ?
- Is an active sprite displayed after 474 unmatched sprites ? Does that hit the limit ? (((480-474)/2)-2) ?
- Are 2 active sprites displayed after 474 unmatched sprites ? Only the first one ?
- Is an active sprite displayed after 476 unmatched sprites ? Never?
SNK says min. 12 68kclk between writes (so 24mclk). 1 write every 24mclk = 64 per scanline.
Why 12 and not 8 ?
All parsing cycles are taken into consideration by SNK to give the "380 sprites max" limit, so CPU I/O must be done in the "1" states (address 600 by default when no I/O request ?).
Timing diagram when the sprite list is being filled:
+5/8: 0 5 2 7 4 1 6 3 | | | | | 5 2 7 4 1 6 3 0 | | | | | 0 1 2 3 4 5 6 7 8 9 A B C D E F | | | | | LLLLLLLLHHHHHHHHLLLLHHHHHHHHLLLL HHHHHHLLLLLLLLHHHHLLLLLLLLHHHLLL 0 1 2 3 4 5 6 7 8 9 A B C D E F | | | | | Parse ################################ ################################ Render ########################## ########################## 24M |'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_|'|_ Addr | 600 | 20F | 210 | 211 | 600 | 601 | 684 | 005 | 205 | 405 | 600 | 212 | 213 | 602 | 603 | 214 | 685 | 006 | 206 | 406 PCK1 ______|'''|___________________________________________________________|'''|_____________________________________________________ PCK1B '''''''|___|'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''|___|'''''''''''''''''''''''''''''''''''''''''''''''''''' LOAD |'''''''|_______________________|'''''''|_______________________|'''''''|_______________________|'''''''|_______________________ 12M __|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|___|'''|_ 2Pixel | | | | | | | | | | | | | | | | /WE ''''''''''''''''''''''''''|___|'|___|'''''''''''''''''''''''''''''''''''''''''''''''|___|'|___|''''''''''''''''''''''''''''''''' Read ? ! ! ! ! ! ! ! ? ! ! ! ! ! ! !
- R/W sequences: (2 write buffers ?)
- 600 RRRWW... 600 RRWWR...
- 600 WWRRW... 600 WRRWW... 600 RRWWR ... 600 RWWRR
- Even lines: Write to list A, Read from list B (Start of display)
- Odd lines: Write to list B, Read from list A
- In 16clk, 2 sprites SCB3 max. are checked to fill up sprite list , and 1 sprite's attributes are read for output
- 384px * 4clk/px = 1536clk/line
- 1536clk / 16clk = 96 sprites max/line
- Available CPU R/W slots depending on parsing progress, safest is ? cycles
Slow (lower) VRAM
- Slow VRAM is 100ns (10MHz) and is read at ?
- 4 slots per render cycle, 1 slot for CPU R/W (1 each 16 68k cycles)